9.4.1 Testing the newly saved image

You should now test the new LispWorks image. To test a configured version of LispWorks, do the following:

1. Change directory to /tmp .
2. Verify that your DISPLAY environment variable is correctly set and that your machine has permission to connect to the display.
3. Start up the new image.

The window-based environment should now initialize--during initialization a window displaying a copyright notice will appear on the screen.

You may wish to work through some of the examples in the LispWorks User Guide , to further check that the configured image has been successfully built.

4. Test the load-on-demand system. In the Listener, type:
CL-USER 1 > (inspect 1)

Before information about the fixnum 1 is printed, the system should load the inspector from the load-on-demand directory.